Category: Photovoltaic Panels

Jan 29

Solar Energy / Enie Start Manufacturing Photovoltaic Panels

The National Enterprise of Electronic Industries (ENIE) will, shortly, begin the manufacture of solar panels. This was affirmed by the APS CEO, Djamel Bekkara, who said that the company he manages has invested in this project no less than 2 billion dinars or 200 billion centimes.

ENIE joins other companies, such as Condor, which has started to manufacture these panels for a few years now. All these companies want to place themselves in a field that will undoubtedly consolidate more in the years to come since the authorities have set up several programs for the encouragement of renewable energies.

This new Ernie plant is located on the perimeter of the parent company in Sidi Bel Abbes. It will employ, in its early days, nearly 100 people. Other recruitments will follow, as this unit approaches its cruising speed.

The integration rate will initially be only 10%, as reported by the CEO. The goal is to achieve, and he adds, 100% shortly. Some workers from this new company have completed training in the United States and Japan.

Make A Solar Thermal Panel


Solar energy in France as in many parts of the world has the advantage of being available for free, sustainably and to provide significant power (850 watts per square meter average in our latitudes on a sunny day). The purchase of photovoltaic solar panels is profitable for the individual only in certain specific cases: An isolated dwelling, or if the state aids are indeed valid. Apart from the cost of buying the panel, its poor performance and batteries to store the energy to change every ten years, you should know that making a solar panel requires a lot, a lot of energy, and money!

However, there is another type of solar panel cheaper to buy, and also readily achievable by any handyman if he knows how to handle a hammer, a saw, and possibly a torch (small torch) type “Camping Gas.”

We will be interested in the manufacture of a solar panel of a thermal type intended to heat water or any other liquid. The highest cost in the installation will be that of the hot water tank which will have a coil to communicate the heat produced by the panel to the water of the balloon. In addition, the latter must include an electrical resistance to make up during periods of severe weather, not to mention the expansion tank, but these are the classic elements of a boiler (there is nevertheless a solution to pass expansion tank, and limiting summer overheating and freezing in winter, called “Drain back”). It is this last solution described at the end of the article that I implement, during 2011, in the house.

Jan 10
2018 Gives You Some Tips To Consider To Find Best Roofing Company


Are you finding the best roofing company san jose California? There are many things to look for in the best roofing contractor. In fact, San Jose has its own share of roofing contractors. But all of these service providers are not the best. Your research is very important when selecting the best company for the project. Extensive research will help you pick the right contractor the first time around. Here are some tips to look for when choosing the best roof repair company in San Jose.

The first thing is to look for a local contractor since he knows the building codes and regulations in the area. The right candidate should have a valid license and adequate insurance to operate in the area. Don’t forget to check customer feedback when selecting the best candidate for the job. The right roofing company should have a majority of positive reviews from their customer base. There are many independent online review sites that provide honest reviews of real customers. Make sure that you check some of these sites before you hire the best contractor for the job.

The above read offers information on how to choose the best roofing company in San Jose.

Dec 29

La COMMERCIALE TUBI opera dal 1974 nel mercato dei tubi in acciaio per applicazioni di impiantistica termoidraulica.

I nostri magazzini sono dislocati su una superficie di circa 80.000 m² di qui 45.000 circa coperti. La loro collocazione geografica ci permette, dal punto di vista della gestione logistica delle commesse, la possibilità di inoltrare le merci rapidamente raggiungendo la clientela dislocata in tutta Italia ed all’estero. Nei magazzini si trova disponibile dal pronto un vasto assortimento di merce con più di 20.000 tonnellate di materiali in oltre 4.000 diverse dimensioni e qualità. Il servizio di consegne è reso ancora più efficiente grazie al parco mezzi circolante, che comprende 5 motrici dotate di gru per lo scarico a terra dei materiali e due bilici con rimorchio in grado di trasportare i materiali in lunghezza fino a 13,60 metri, ed alla collaborazione con le più importanti aziende italiane di autotrasporti di materiali ferrosi. Infine, grazie alla collaborazione con i più importanti produttori italiani, europei e mondiali, siamo in grado di sottoscrivere accordi commerciali che prevedano forniture a programma con notevoli vantaggi sia dal punto di vista economico che da quello della flessibilità e della velocità delle consegne.